Honeywell Home THX1200B6/U ElitePro S1200 Thermostat Review: Who It Fits and Who Should Skip It
This Honeywell Home THX1200B6/U ElitePro S1200 thermostat review examines published specs for complex HVAC setups, including stage limits and display features.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This honeywell home thx1200b6 u elitepro s1200 thermostat review focuses on a unit designed for complex HVAC setups. It features a 5-inch black display and supports up to 4 heat pump stages or 3 conventional stages. The device uses Redlink 3.0 for wireless connections. It also streams video from compatible doorbells. You get detailed control over heating and cooling cycles. The specs show it handles dual fuel and radiant systems. This makes it a robust choice for homes with varied climate needs. The hardware is compact, measuring 5.24 inches wide.
- Streams video from First Alert and Ring doorbells on the 5-inch screen
- Supports 4H/2C heat pump or 3H/3C conventional HVAC systems
- Uses Redlink 3.0 to connect with room and outdoor sensors
- Controls up to two IAQ devices for humidity and CO2 monitoring
- Compatible with dual fuel, fan-coil, PTAC, and radiant systems
Good fit for
You should consider this thermostat if you have a multi-stage heating or cooling system. It suits homes with heat pumps, dual fuel setups, or radiant heating. If you want to monitor indoor air quality, the IAQ device support is useful. The video streaming feature helps if you already use Ring or First Alert doorbells. It also works well if you need precise control over fan-coil or PTAC units. The wireless sensor integration helps balance temperatures across different rooms.
Who can skip it
You might want to look elsewhere if your system is simple. This unit handles complex stages, which may be unnecessary for basic conventional setups. If you do not use Ring or First Alert devices, the video feature adds little value. The reliance on Redlink 3.0 means you need compatible sensors for full functionality. It is not ideal if you prefer a minimal interface. The larger 5-inch display takes up more wall space than standard models.
Verdict
This thermostat is built for homes with complex HVAC systems and smart doorbell integration. It offers detailed control and air quality monitoring for those who need it.
Key specs for this thermostat
HVAC Stages: 4H/2C heat pump or 3H/3C conventional
This rating tells you how many heating and cooling stages the unit supports. You can use it for heat pumps with four heating and two cooling stages. It also works for conventional systems with three heating and three cooling stages. If your home has a complex HVAC setup, this flexibility matters. You should check your current system’s wiring before buying. This spec ensures the thermostat can handle your specific equipment without needing extra adapters.
Display Size: 5"
The screen measures five inches diagonally. This size provides a clear view of settings and status. You can read information easily from across the room. A larger display is helpful if you have vision challenges or prefer big text. It also shows more data at once. When shopping, compare this to smaller screens that may feel cramped. This size balances visibility with wall space usage for most homes.
HVAC Compatibility: Dual fuel, fan-coil, PTAC, radiant
This list shows which heating and cooling types the thermostat supports. You can use it for dual fuel systems that switch between gas and electric. It works with fan-coil units, PTACs, and radiant heating. If your home uses one of these systems, this unit is a good fit. You do not need to search for a special model. This broad compatibility saves you time. Always verify your specific system type matches these categories.
Wireless Connectivity: Redlink 3.0
Redlink 3.0 is Honeywell’s proprietary wireless protocol. It connects the thermostat to room sensors and outdoor sensors. You get more accurate temperature readings from multiple locations. This system avoids the interference issues common with standard Wi-Fi. It creates a dedicated network for your HVAC devices. When comparing, note that this is not standard Wi-Fi. You may need compatible sensors to use this feature fully.
Physical Design And Build Specs
The Honeywell Home ElitePro S1200 thermostat features a black finish and a 5-inch display. According to the listing, the unit measures 5.24 inches in width and 3.53 inches in height. The depth is listed at 0.96 inches. This compact footprint allows it to fit on standard wall plates without protruding excessively. You can mount it in residential or commercial spaces where space is limited.
The device weighs 13.8 ounces. This weight suggests a sturdy build that stays securely on the wall. The black color provides a neutral look that blends with most interior decors. The 5-inch screen offers ample space for reading data and navigating menus. You get clear visibility of settings and status indicators without straining your eyes.
This design supports complex HVAC setups. The physical layout accommodates the necessary wiring for up to 4 heat pump stages or 3 conventional stages. The compact size does not compromise functionality. You can install it in areas where larger thermostats would be cumbersome. The build quality appears suitable for daily use in various environments. The dimensions ensure it remains unobtrusive while providing essential control features.
Setup And Everyday Use Guide
Installation begins with verifying your HVAC system type. This unit handles up to four heating and two cooling stages for heat pumps. It also supports three heating and three cooling stages for conventional systems. You can use it with dual fuel, fan-coil, PTAC, and radiant setups. The listing notes that an equipment interface module may be required for some configurations. This module simplifies installation and expands application coverage. You must check your existing wiring against these stage limits before proceeding.
Daily operation relies on Redlink 3.0 wireless technology. This connection links the thermostat to room sensors, outdoor sensors, and the equipment interface module. You can monitor temperature, humidity, and motion in other rooms. The system uses advanced occupancy detection to adjust settings automatically. This feature helps reduce energy usage when spaces are unoccupied. You can also connect up to two indoor air quality devices. These units track humidity, volatile organic compounds, and estimated carbon dioxide levels. Configurable outputs allow you to manage these sensors directly from the thermostat interface.
The 5-inch display provides a clear view of current conditions and system status. You can stream video feeds from compatible First Alert and Ring doorbells. This allows you to see visitors without leaving the room. The black finish blends into most wall spaces. The unit weighs 13.8 ounces and measures 5.24 inches wide. Setup requires matching your HVAC stages to the thermostat’s capacity. Once connected, the wireless sensors handle temperature readings from multiple locations. The system adjusts heating and cooling based on real-time data from these remote points.
Before you buy this thermostat
You need to verify your HVAC system stages match the 4H/2C heat pump or 3H/3C conventional limits. This unit supports dual fuel, fan-coil, PTAC, and radiant systems. Check if you want to stream video from First Alert or Ring doorbells, as this requires compatible devices. You may need additional sensors for the Redlink 3.0 wireless network to track temperature, humidity, and motion across rooms. The device controls up to two IAQ devices for monitoring VOCs and CO2. Ensure you have the Equipment Interface Module if you plan to expand application coverage. This thermostat fits well in homes with complex heating and cooling needs. It integrates smart occupancy detection to save energy. Consider if you need commercial-grade features or if a simpler model suffices. The 5-inch display is large, so check wall space. Maintenance is minimal, but sensor batteries may need replacement over time. This option suits those who want detailed indoor air quality data alongside video monitoring.
Check before you buy
- Confirm your HVAC stages do not exceed 4H/2C or 3H/3C limits.
- Check if you need video streaming from First Alert or Ring doorbells.
- Verify compatibility with dual fuel, fan-coil, PTAC, or radiant systems.
- Ensure you have space for the 5-inch display on your wall.
- Decide if you need IAQ monitoring for VOCs and CO2 levels.
Honeywell Home ElitePro 5-Inch Thermostat
Best for: Complex HVAC systems with video doorbell needs
- HVAC Compatibility
- Dual fuel, fan-coil, PTAC, radiant
- HVAC Stages
- 4H/2C heat pump or 3H/3C conventional
- Wireless Connectivity
- Redlink 3.0
- Display Size
- 5"
- Color
- Black
- Dimensions
- 0.96 × 5.24 × 3.53 inches
This thermostat features a 5-inch display and supports up to 4H/2C heat pump or 3H/3C conventional HVAC stages. It connects via Redlink 3.0 wireless technology to room sensors and outdoor monitors. You can stream video from Ring or First Alert doorbells directly to the screen. The unit also controls two IAQ devices to track humidity, VOCs, and CO2 levels. It fits homes with dual fuel, fan-coil, PTAC, or radiant systems.
- 5-inch display for video streaming from Ring or First Alert doorbells
- Supports 4H/2C heat pump or 3H/3C conventional HVAC stages
- Redlink 3.0 wireless connectivity for sensors and equipment modules
- Monitors indoor humidity, VOC, and estimated CO2 levels
- Compatible with dual fuel, fan-coil, PTAC, and radiant systems
- Heavier build at 13.8 ounces compared to lighter standard units
- Limited to controlling only two IAQ devices simultaneously
- Requires specific Redlink 3.0 compatible sensors for full functionality
- You want to view doorbell video on a 5-inch screen
- You have a complex HVAC system with heat pump or radiant stages
- You need to monitor indoor air quality metrics like CO2
- You prefer a smaller display under 5 inches
- You do not have compatible Redlink 3.0 wireless sensors
- You only need basic heating and cooling without IAQ monitoring
Verdict: Honeywell Home ElitePro 5" Thermostat suits users who need detailed HVAC control and video doorbell integration. It is ideal for complex systems requiring IAQ tracking and wireless sensor connectivity.
Specifications side by side
| Spec | Honeywell Home ElitePro 5-Inch Thermostat |
|---|---|
| HVAC Compatibility | Dual fuel, fan-coil, PTAC, radiant |
| HVAC Stages | 4H/2C heat pump or 3H/3C conventional |
| Wireless Connectivity | Redlink 3.0 |
| Display Size | 5" |
| Color | Black |
| Dimensions | 0.96 × 5.24 × 3.53 inches |
| Weight | 13.8 ounces |
| Model | THX1200W5 |
Frequently asked questions
Does this thermostat work with video doorbells?
Yes, the Honeywell Home ElitePro S1200 supports video doorbell integration. You can connect it to First Alert or Ring doorbells for visual monitoring. This feature allows you to see visitors directly on the 5-inch display. It is ideal for homes where security and climate control are both priorities. The unit handles these connections alongside standard HVAC functions.
What are the physical dimensions of the ElitePro S1200?
The thermostat measures 5.24 inches in width and 3.53 inches in height. The depth is 0.96 inches, giving it a compact footprint. It weighs 13.8 ounces. The device features a black finish. These dimensions fit standard wall spaces without overwhelming the room. The 5-inch screen provides ample space for viewing system status and video feeds.
Is the ElitePro S1200 compatible with heat pumps?
Yes, it supports complex heat pump setups. The unit handles up to four heating stages and two cooling stages. This capacity suits systems requiring detailed stage management. You can use it for multi-stage heat pumps that need precise temperature control. The specifications ensure it works with systems that demand more than basic on-off functionality.
What wireless technology does this thermostat use?
The device uses Redlink 3.0 for wireless connections. This technology enables reliable communication between the thermostat and your HVAC system. It supports wireless sensor connectivity for enhanced comfort tracking. Redlink 3.0 helps maintain stable signals for both climate control and video doorbell integration. This ensures consistent performance across your home network.
Can I use this thermostat with conventional HVAC systems?
Yes, it works with conventional systems. The unit supports three heating stages and three cooling stages. This rating covers most standard residential setups. You can use it for systems that do not require heat pump configurations. The flexibility allows you to install it in homes with traditional furnaces and air conditioners without compatibility issues.
Does the ElitePro S1200 support dual fuel systems?
Yes, the thermostat supports dual fuel systems. It can manage both electric and gas heating sources. This feature is useful for homes that switch between fuel types based on efficiency or cost. The unit handles the transitions automatically. You get seamless operation without needing separate controls for each heating source.
What is the model number for this thermostat?
The model number is THX1200W5. This identifier distinguishes it from other Honeywell Home units. It helps you verify compatibility with your existing wiring or accessories. You can use this number when searching for replacement parts or technical support. It corresponds to the ElitePro series with the 5-inch display and black finish.
